View at 1024x768
| |
Petro-Chemical - Civil Engineers
|
|
Graham F Brown
Dimensional
Control/Survey HNC Civil Engrg
I have operated on a freelance basis for 20years in
the construction and fabrication industries. I am very experienced in the
use of my own total station/data capture, and co-ordinate manipulation
software. Producing fit-up and as-built surveys of spool pieces, modules,
and many other oil and petro-chemical fabrications, in turn producing a
first time ‘fit’ of small and large fabricated items. I am prepared to
work anywhere in the world either on my own or as part of a survey team.
|
| Rajinder
Singh Chhatwal
Civil & Structural Engineering
Ph.D.
(Stress Analysis), University of Surrey, Guildford.
M.Sc.
(Mech. Eng.), Queen's University, Kingston, Ontario, Canada.
M.Tech.
(Materials Handling), B.E. (Mechanical) |
| Clark
Robert
H.N.C.
Civil Engineering
A competent individual in civil projects inspection,
quality management, surveying (Topographic, hydrographic & dimensional
control). Design & draught of civil works, reinforced concrete,
drainage, structural steel and pipework. Experience
in construction of petrochemical and gas plants, power stations,
steelworks, roadworks, main drainage, sewage & water works, pumping
stations, MOD works, RC frames, structural steel, high & low rise
housing, marine works, piling (driven, bored and vibratory) stone column
ground stabilization, also pile testing. Autocad 2000 familiar. |
| IAN
GIBSON CAD Designer Structural
Steelwork / Civil
Experience in a
wide range of projects, from large structures, such as Power Stations,
Bridges,
Petrochemical Plants, Pharmaceutical Plants, Multi-storey Office Blocks,
& Flood Barriers, to medium size Industrial / Commercial buildings,
& Football Stadium developments, down to small Portal Frame buildings,
& Lean-to extensions, also, 3-Pin Arch buildings, mine shaft, &
conveyor steelwork.
Incorporating
the full scope of all primary, secondary, & tertiary steelwork,
including hip & valley rafters, cold rolled purlin, & sheeting
rail systems, cladding & sheeting, site and service layouts,
architectural and equipment layouts, & R.C. detailing. |
|
Peter
J Green AutoCAD PDMS
MicroStation Dogs
Over
30 years as a structural detail and design draughtsman within the offshore
oil/gas, petrochemical and civil/structural industries. From 1965 - 1971
he served a five year indentured apprenticeship with Modern Engineering
(Bristol) Limited covering all aspects of structural design, fabrication
detailing. From 1971 - 1978 petrochemical experience was gained from
layout/design,checking of fabrication details of piperacks, pipe supports,
large & small cladded buildings, support
structures / platforms, concrete/drainage details. From
1978 - present has been involved with Civil/Structural manual/CAD
draughting 3d
modelling/2draft and checking on British and Norwegian
contracts Work
done in this period included layout/checking of
Civil/structural refurbishment work ,deck structures ,pipe
supports, installation and hook up details on substructure, drilling,
utilities and accommodation modules. Subsea well template layouts and
riser protection frames. He is familiar with British and Norwegian welding
codes and safety standards. |
|
